Use the Flexi Storage Home Solutions Masonry and Timber Plugs & Screws to safely and securely affix your Flexi Storage Home Solutions Wall Strips and Hang Tracks to masonry walls or into timber stubs or walls. This pack contains 20 x masonry plugs and 20 x 6 gauge Phillips head screws.
Use both the Plugs & Screws when installing into brick, stone or concrete; the Plug provides a material that can be screwed into and will hold the Screw firmly in place.
When installing into Timber Walls or Studs, simply affix with the provided Screws.
Masonry and Timber Plugs & Screws 35mm 20PK
- For fixing Flexi Storage Home Solutions Wall Strips and Hang Tracks to masonry and/or timber
- Contains 20 x masonry plugs and 20 x 6 Gauge Phillips head screws
- Use Plugs & Screws when installing into masonry
- Use Screws only when installing into timber
Included:
- 20 x Masonry Plugs
- 20 x 6 Gauge Phillips Head Screws
Installation Instructions: Masonry
- Mark the position of the hole with a pencil
- Using a 8mm masonry drill bit, drill a 40mm deep hole
- 8mm Masonry Drill Bit (for masonry wall installation)
- Tap Wall Plug into hole until flush with the wall surface – a light hammer may be required
- Position Wall Strip or Hang Track over Wall Plug and install Screw into Wall Plug
Installation Instructions: Timber
- Mark the position of the hole with a pencil
- Position Wall Strip or Hang Track over hole and install Screw
